← Return
Cert CLBR-0000771
Pikachu front
Pikachu back
tap the card to flip
Sealed · CLBR-0000771

Pikachu

30C · No. 45

9.5/ 10 · Mint+

9.5
Centering
Well centred, both axes
10
Corners
No wear on any corner
10
Edges
Clean edges, no whitening
10
Surface
Within tolerance

Corner profiles

Measured deviation from the fitted arc at each corner - green is excess material, red is missing (rounding/chipping).

Front
0°90°+0.62-0.62
Top-left
dev -0.044…+0.620 mm
0°90°+0.17-0.17
Top-right
dev -0.163…+0.174 mm
0°90°+0.26-0.26
Bottom-left
dev -0.130…+0.261 mm
0°90°+0.25-0.25
Bottom-right
dev -0.120…+0.250 mm
Back
0°90°+0.32-0.32
Top-left
dev -0.076…+0.315 mm
0°90°+0.37-0.37
Top-right
dev -0.044…+0.370 mm
0°90°+0.20-0.20
Bottom-left
dev -0.076…+0.196 mm
0°90°+0.35-0.35
Bottom-right
dev -0.120…+0.348 mm

Centering

Image border measured against the card edge on both axes, each side expressed as a percentage of the total.

Front
50 / 50Left · Right
42.6 / 57.4Top · Bottom
95Score / 100
Back
51.4 / 48.6Left · Right
47.5 / 52.5Top · Bottom
100Score / 100

Surface

Every scratch, dent or mark the darkfield scan actually detected - nothing summarised away. Click a mark to zoom to it on the photo.

Front · score 100 / 100

No marks detected on this face.

Back · score 100 / 100

No marks detected on this face.

What the engine saw

The fitted arc and the actual measured outline, drawn over that exact corner of the real photo - same for each edge.

Front · Corner fit
Top-left
Top-right
Bottom-left
Bottom-right
Front · Edges
Top
dings 0 · max 0mm · recession 0.04mm
Bottom
dings 0 · max 0mm · recession 0mm
Left
dings 0 · max 0mm · recession 0.02mm
Right
dings 0 · max 0mm · recession 0mm
Back · Corner fit
Top-left
Top-right
Bottom-left
Bottom-right
Back · Edges
Top
dings 0 · max 0mm · recession 0.02mm
Bottom
dings 0 · max 0mm · recession 0.02mm
Left
dings 0 · max 0mm · recession 0.07mm
Right
dings 0 · max 0mm · recession 0.04mm