← Return
Cert CLBR-0000761
Crystal lugia 149/147 front
Crystal lugia 149/147 back
tap the card to flip
Sealed · CLBR-0000761

Crystal lugia 149/147

AQ · No. 149

4/ 10 · EX–PR

9
Centering
Well centred, both axes
9.04
Corners
No wear on any corner
8.11
Edges
Clean edges, no whitening
4.02
Surface
Within tolerance

Corner profiles

Measured deviation from the fitted arc at each corner - green is excess material, red is missing (rounding/chipping).

Front
0°90°+0.21-0.21
Top-left
dev -0.022…+0.207 mm
0°90°+0.11-0.11
Top-right
dev -0.087…+0.109 mm
0°90°+0.25-0.25
Bottom-left
dev -0.044…+0.250 mm
0°90°+0.24-0.24
Bottom-right
dev -0.022…+0.239 mm
Back
0°90°+0.20-0.20
Top-left
dev -0.196…+0.120 mm
0°90°+0.28-0.28
Top-right
dev -0.283…+0.076 mm
0°90°+0.24-0.24
Bottom-left
dev -0.239…+0.098 mm
0°90°+0.30-0.30
Bottom-right
dev -0.304…+0.033 mm

Centering

Image border measured against the card edge on both axes, each side expressed as a percentage of the total.

Front
53.85 / 46.15Left · Right
50 / 50Top · Bottom
100Score / 100
Back
58 / 42Left · Right
50.2 / 49.8Top · Bottom
90Score / 100

Surface

Every scratch, dent or mark the darkfield scan actually detected - nothing summarised away. Click a mark to zoom to it on the photo.

Front · score 40.2 / 100
Front surface
1
2
3
4
1 Gouge scratch · 7.18 mm · 4.05 mm² firm: scratch detector, lit from NEW (23 sigma)
2 Gouge scratch · 6.97 mm · 4.17 mm² firm: scratch detector, lit from NW (22 sigma)
3 Line scratch · 4.47 mm · 0.22 mm² firm: relief detector only (19 sigma)
4 Line scratch · 4.08 mm · 0.2 mm² firm: relief detector only (15 sigma)
Back · score 76.32 / 100

No marks detected on this face.

What the engine saw

The fitted arc and the actual measured outline, drawn over that exact corner of the real photo - same for each edge.

Front · Corner fit
Top-left
Top-right
Bottom-left
Bottom-right
Front · Edges
Top
dings 0 · max 0mm · recession 0.02mm
Bottom
dings 0 · max 0mm · recession 0.09mm
Left
dings 0 · max 0mm · recession 0.02mm
Right
dings 0 · max 0mm · recession 0.02mm
Back · Corner fit
Top-left
Top-right
Bottom-left
Bottom-right
Back · Edges
Top
dings 0 · max 0mm · recession 0.22mm
Bottom
dings 0 · max 0mm · recession 0.24mm
Left
dings 0 · max 0mm · recession 0mm
Right
dings 0 · max 0mm · recession 0.02mm