← Return
Cert CLBR-0000749
Pikachu front
Pikachu back
tap the card to flip
Sealed · CLBR-0000749

Pikachu

30C · No. 50

10/ 10 · Pristine

10
Centering
Well centred, both axes
10
Corners
No wear on any corner
10
Edges
Clean edges, no whitening
10
Surface
Within tolerance

Corner profiles

Measured deviation from the fitted arc at each corner - green is excess material, red is missing (rounding/chipping).

Front
0°90°+0.17-0.17
Top-left
dev -0.087…+0.174 mm
0°90°+0.15-0.15
Top-right
dev -0.087…+0.152 mm
0°90°+0.15-0.15
Bottom-left
dev -0.152…+0.141 mm
0°90°+0.16-0.16
Bottom-right
dev -0.163…+0.120 mm
Back
0°90°+0.13-0.13
Top-left
dev -0.098…+0.130 mm
0°90°+0.11-0.11
Top-right
dev -0.087…+0.109 mm
0°90°+0.13-0.13
Bottom-left
dev -0.130…+0.087 mm
0°90°+0.11-0.11
Bottom-right
dev -0.109…+0.065 mm

Centering

Image border measured against the card edge on both axes, each side expressed as a percentage of the total.

Front
50 / 50Left · Right
52 / 48Top · Bottom
100Score / 100
Back
51 / 49Left · Right
49.9 / 50.1Top · Bottom
100Score / 100

Surface

Every scratch, dent or mark the darkfield scan actually detected - nothing summarised away. Click a mark to zoom to it on the photo.

Front · score 100 / 100

No marks detected on this face.

Back · score 100 / 100

No marks detected on this face.

What the engine saw

The fitted arc and the actual measured outline, drawn over that exact corner of the real photo - same for each edge.

Front · Corner fit
Top-left
Top-right
Bottom-left
Bottom-right
Front · Edges
Top
dings 0 · max 0mm · recession 0.04mm
Bottom
dings 0 · max 0mm · recession 0.02mm
Left
dings 0 · max 0mm · recession 0.02mm
Right
dings 0 · max 0mm · recession 0.04mm
Back · Corner fit
Top-left
Top-right
Bottom-left
Bottom-right
Back · Edges
Top
dings 0 · max 0mm · recession 0mm
Bottom
dings 0 · max 0mm · recession 0.04mm
Left
dings 0 · max 0mm · recession 0.09mm
Right
dings 0 · max 0mm · recession 0.04mm